Machining On CNC Lathe

CNC Lathe Booking Time: 3 Hrs

Max CMF Points Earned: 200

Motor Coupler Shaft

This is Mild Steel Shaft For Robot Wheel. It is used with Bearing Housing for the purpose of smooth power transmission between the motor and the HD wheel of your robot.

Download Process Sheet for CNC Lathe Machining

Steps in Machining Process

Step:01 Design of part, generation of codes and simulation (suggested software: Autodesk Inventor

Step :02 Machine and workpiece set up and referencing

Step: 03 Facing

Step: 04 Turning of the piece from 20 mm dia. to 15 mm dia.

Step: 05 Turning of the w/p from 15 mm dia. to 8 mm dia. for 0 mm to 20 mm in length.

Step 06: Turning of the w/p from 15 mm dia. to 12 mm dia. for 20 mm to 48 mm in length.

Step 07: Grooving of the w/p from 12 mm dia. to 9 mm dia. for 21.5 mm to 23 mm in length

Step 08: Turning of the w/p from 15 mm dia. to 11 mm dia. For 68 mm to 94 mm in length.

Step 09: Turning of the w/p from 15 mm dia. to 8 mm dia.(approx.), 94 mm to 110 mm in length.

Step 10: Threading M8

Learning Outcomes:

·       Designing of product.

·       Generation of G&M code

·       Workpiece alignment and referencing

·       Operations like: Facing, Turning, Step turning, Grooving, Threading etc.